Welcome To Roberts Warr Electronics Limited

FEATURES:

ACCOMMODATE UNIVERSAL AC SOURCES
COMPACT 4"x2"x1"PCB FORMAT
MEET MEDICAL STANDARD EN 60601-1/UL 2601-1
EMI MEET EN 55011 & FCC CLASS B
CE MARKING COMPLIANCE

FEATURES

INPUT SPECIFICATION

Input Voltage: Range typ. 90-264Vac. Rating 100 to 240Vac.
Input Connector: V-M connector.
Input Frequency: 47-63Hz.
Inrush Current: =12.0A rms cold start @230Vac.
Input Current: Typ. 0.9A@115Vac, 0.435 @230Vac.
Dielectric Withstand: Meet IEC 60601-1.
EMI: Meet EN 55011 & FCC Class B.
Hold-up Time: Typ. 11.2mS @115Vac, 72mS @ 230Vac.
Earth Leakage: Less than 0.1mA @230Vac.

OUTPUT SPECIFICATION

Output Voltage: See Ratings Chart.
Output Current: See Ratings Chart.
Output Connector: V-M connector.
Output Wattage: Typ. 62 watts.
Line Regulation: Typ. 0.1%.
Load Regulation: Main VO1 typ. ±1.0%.
Noise & Ripple: Typ. 1.0% peak to peak.
OVP: Built-in at main output VO1(Latch).
Adjustability: Not available.
Overload Protection (OLP): Fully protected against outputs overload and short circuit. Typ. OLP set at 105-120% of rating output power. Consult the factory for OLP setting.

GENERAL SPECIFICATION

Efficiency: Typ. 80-89.5 %. (Various with output voltage).
Switching Frequency: 85KHz.
Circuit Topology: Fixed frequency flyback circuit.
Transient Response: Output voltage returns in less than 0.5mS following a 50% load change.
Safety Standard: Medical standards IEC 60601-1/UL 2601-1/EN 60601-1 Class I.
Power Density: 7.7Watts / Cubic Inch.

Operating Temperature: 0 to +50 °C under forced air flow for full load. Derate by 1.3W/°C from 40°C to 50°C.
Storage Temperature: -20 to +85°C.
Temperature Coefficient: Typ. 0.04%/°C.
Cooling: At least 5 cfm direct forward air flow is required to achieve full rating power.
Construction: 4"x2"x1" PCB format.