Welcome To Roberts Warr Electronics Limited

Hitron Power Supply Distributor for the UK

UNIVERSAL INPUT AC-DC MEDICAL APPLICATION OPEN FRAME SINGLE & MULTI-OUTPUT 100 WATTS INTERNAL SWITCHING POWER SUPPLIES HMI100 SERIES

FEATURES:

ACCOMMODATE UNIVERSAL AC SOURCES
COMPACT 4.5"x 2.5"x1.2" PCB FORMAT
MEET MEDICAL STANDARD EN 60601-1/UL 2601-1
EMI MEET EN 55011 & FCC CLASS B
CE MARKING COMPLIANCE

FEATURES

INPUT SPECIFICATION

Input Voltage: 90-264Vac.
Input Connector: V-M connector.
Input Frequency: 47-63Hz.
Inrush Current: Typ. 9.68Arms @230Vac.
Input Current: Typ. 1.8A@115Vac, 0.9A @230Vac.
Dielectric Withstand: Meet IEC 60601-1.
EMI: Meet EN55011 & CISPR Class B.
Hold-up Time: Typ. 12.8mS @115Vac, 76mS @ 230Vac.
Earth Leakage: Less than 0.189mA @230Vac.

OUTPUT SPECIFICATION

Output Voltage: See Ratings Chart.
Output Current: See Ratings Chart.
Output Connector: V-M connector.
Output Wattage: Typ. 100 watts.
Line Regulation: Typ. ±0.5%.
Load Regulation: Main VO1 typ ±1%. Aux. VO2 typ. ±1%. Aux. VO3 typ. ±5%. Aux. VO4 typ. ±5%.
Noise & Ripple: Typ. 1.0% peak to peak.
OVP: Built-in at main output (Latch).
Adjustability: Available at VO1 and VO2.
Overload Protection (OLP): Fully protected against outputs overload and short circuit. Typ. OLP set at 110-150% of rating output power. Consult the factory for OLP setting.

GENERAL SPECIFICATION
Efficiency: Typ. 74-80%(Various with output voltage). Switching Frequency: 68 KHz. Circuit Topology: Single-Forward circuit. Multiple-Fixed freq. flyback circuit. Transient Response: Output voltage returns in less than 14-44mS following a 25% load change. Safety Standard: Meet Medical standards UL 60601-1/EN 60601-1 Class I.	Operating Temperature: 0 to +50 °C under forced air flow for full load.(Various with output voltage). Storage Temperature: -20 to +85°C. Temperature Coefficient: Typ. 0.05%/°C. Cooling: Recommended 24CFM cooling fan for full rating load. Power Density: 7.4 Watts / Cubic Inch. Construction: 4.5"x2.5"x1.2" PCB format.