Welcome To Roberts Warr Electronics Limited

Hitron Power Supply Distributor for the UK

UNIVERSAL INPUT HARMONIC CORRECTION AC-DC PCB OPEN FRAME SINGLE & DUAL OUTPUT 95 WATTS INTERNAL SWITCHING POWER SUPPLIES HVP95 SERIES

FEATURES:

ACCOMMODATE UNIVERSAL AC SOURCES
MEET IEC1000-3-2 HARMONIC CORRECTION
MEET UNIVERSAL SAFETY STANDARDS
EMI MEET CISPR PUB. 22 CLASS B
CE MARKING COMPLIANCE

SPECIFICATION

INPUT SPECIFICATION

Input Voltage: Typ. 90-264Vac with PFC.
Input Connector: Molex V-M connector.
Input Frequency: 47-63Hz.
Inrush Current: Typ. 20A@230Vac.
Input Current: Typ. 2.5A @115Vac, 1.2A @230Vac.
Dielectric Withstand: Meet IEC950.
EMI: Meet CISPR PUB. 22 Class B.
Hold-up Time: Typ. 30mS @115Vac & 230Vac.
Over Temp. Protection: By thermostat.
Power Factor Correction: Meet Harmonic Correction per IEC1000-3-2. PF typ. 0.98.
Earth Leakage: Less than 0.5mA @230Vac.

OUTPUT SPECIFICATION

Output Voltage: See Ratings Chart.
Output Current: See Ratings Chart.
Output Connector: Molex V-M connector.
Output Wattage: Typ. 95 Watts under forced air flow.
Line Regulation: Typ. 0.1-0.5%.
Load Regulation: Main VO1± 1.0% typ. Aux.VO2 ± 2-3.0% typ. (Common choke).
Noise & Ripple: Typ. 1.0% peak to peak.
OVP: Built-in at main VO1 only.
Adjustability: Available at main VO1.
Overload Protection (OLP): Fully protected against output overload and short circuit. Consult the factory for OLP setting.

GENERAL SPECIFICATION
Efficiency: Typ. 75%. Switching Frequency: Fixed frequency at 60K Hz. Circuit Topology: PWM fixed frequency forward circuit. Transient Response: Output voltage returns in less than 3mS following a 25% load change. Safety Standard: UL1950/EN60950 Class I	Operating Temperature: 0 to +50°C with 20 cfm forced air cooling for full load. Storage Temperature: -20 to +85°C. Temperature Coefficient: Typ. 0.04%/°C. Cooling: Required 20 cfm forced air flow. Construction: PCB open frame format. Power Density: 3.28Watts / Cubic Inch.